Boss Audio SLIM8 8" Powered Subwoofer System
High and Low Level Inputs
An amplifier with both high-level and low-level inputs provides flexibility by allowing you to build an audio system using virtually any standard factory or aftermarket source unit. High-level (speaker level) inputs accept the signal from the speakers, while low-level (RCA) inputs accept the signal from the pre-amp outputs of the source unit.
MOSFET stands for Metal Oxide Semiconductor Field-Effect Transistor. MOSFETs are used either as a switch or to amplify a signal. MOSFETs are superior to other FETs, because they require less current to operate, which makes them better suited for car audio.
The phase control feature allows you to adjust the speakers phase to ensure all audio signals are playing together rather than against each other. When bass notes are noticeably absent, a quick and easy adjustment to the phase control could provide the perfect remedy.
If the amplifier gets too hot, the thermal protection circuit turns the amp off and allows the amp to cool down before turning it back on. If a speaker fails causing an electrical short, the protection circuit will automatically cut the output and remain in that state until the short is resolved. These safety features give you peace of mind knowing the amplifier is constantly monitoring conditions to protect itself.
Single Voice Coil
A subwoofer with a single voice coil can be powered by an appropriately matched amplifier or can be combined with multiple single voice coil subwoofers to achieve a variety of impedances to match your amp set up. Single voice coil subwoofers are generally ideal for low to medium-power applications.
Subwoofer Level Control
The ability to boost or attenuate the sub level when an amp and subwoofer are connected to the subwoofer pre-amp output.
Variable Bass Boost
Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Variable Gain Control
Variable Gain Control lets you balance the amps output with the speakers or subs the amp is driving. To much gain will lead to distortion and to little will lead to clipping.
Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
SUBWOOFER SIZE: 8"
PEAK POWER HANDLING: 800 Watts
RMS POWER HANDLING: 400 Watts
VOICE COIL CONFIGURATION: SINGLE
IMPEDANCE: 2.6 Ω
SUBWOOFER LEVEL CONTROL: Yes
8” woofer with 800 Watt Max Built-in Amplifier
Variable Low Pass Filter (50-150Hz), Variable Bass Boost 0 to+12dB
Remote Level Control
Thermal, Overload and Short Protection Circuits, Soft Delay Remote Turn-On
High Level and Low Level RCA Inputs
Input Sensitivity Selector: 0.2V-6V, Phase Shift Selector Switch: 0 or 180°
LED Power Status Indicator