Pioneer GM-A3702 2-Channel Bridgeable Amplifier

Pioneer GM-A3702

2 Channel Bridgeable Amplifier

• 500 Watts Max Power
• Automatic signal sensing and Turn-ON
• Hi-Volt input level control
• Balanced isolator input circuit

CEA2006 Specifications
Power Output: 60 Watts RMS x 2 Channels (4 ohms ≤ 1% THD+N)
Signal-to-Noise Ratio: 78 dBa (Reference: 1 Watt into 4 ohms)

Overview

Technology of GM Series
From dramatic distinction to dramatic design, Pioneer's new GM-Series amplifiers are thrillers in every sense, pushing the limits of flexibility and functionality.



Growing Power, Shrinking Size
New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient size for flexibility of installation in various car cabins.



Automatic Signal Sensing and Turn-On
Pioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver.

When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer's amplifiers automatically detect the input signal and select RCA level or speaker level.



specifications



General

• Number of Channels 2
• Amplifer Class Class AB
• Maximum Power Output 500W
• Maximum Power Output at 2 Ohms 95W x 2
• Maximum Power Output at 4 Ohms 60W x 2
• Maximum Power Output - Bridged at 4 Ohms 500W
• Nominal Power (RMS) Output at 2 Ohms 95W x 2
• Nominal Power (RMS) Output at 4 Ohms 60W x 2
• Nominal Power (RMS) Output - Bridged at 4 Ohms 190W x 1
• Frequency Response 10Hz ~ 70kHz
• Total Harmonic Distortion (THD) <0.05 %
• Signal-to-Noise (SN) Ratio >95 dB
• Fuse Rating 25A

Specs

• RCA Inputs 2-Ch.
• Speaker Level Inputs Yes
• Crossover Type LPF
• Low-Pass Crossover Frequency 80Hz
• Low Pass Slope (dB/octave) -12db/oct
• Automatic Signal Sensing and Turn-On Yes
• Hi-Volt Input Level Control 0.3V to 6.5V (RCA in), 3.0V to 26V (SP in)
• Terminal Type Screw-Type Terminal
• Load Impedance Allowance (Ohm) 2 to 4
• Bridgeable Yes
• Protection Control System Yes
• Dimensions (WxHxD)(inches) 246(W) X 60(H) X 180(D) mm
• Warranty 1 Year