Now Hiring - Installers, Detailers and Window Tinters. Learn More

Stores open in WA, OR, CO and TX Find Your Store

You’re Invited. Celebrate 37 years of service and installation excellence with an exclusive gift from Car Toys.
Brand JL AUDIO
SKU:  JD4004
(0 Reviews)

JL Audio JD400/4 400 Watt 4-Channel Full-Range Class D Amplifier

Brand JL AUDIO
SKU:  JD4004
(0 Reviews)

JL Audio JD400/4 400 Watt 4-Channel Full-Range Class D Amplifier

$279.99
In Stock
Free 2 day shipping
Installation Service
Available at all Car Toys locations
Our certified installers are true automotive enthusiasts. Their work is their passion and for jobs big or small, simple or complex, there's no better way to go..
JL Audio JD400/4 Top Angle
Brand JL AUDIO
SKU:  JD4004
(0 Reviews)
In Stock

JL Audio JD400/4 400 Watt 4-Channel Full-Range Class D Amplifier

$279.99

Overview

About This Product

Description

JL Audio JD400/4 400 Watt 4-Channel Full-Range Class D Amplifier

Utilizing our exclusive NexD™ high-speed switching technologies, the JD400/4 amplifier is engineered to deliver loads of clean power, with excellent efficiency and low distortion. This little guy churns out 100 watts of audio from each of its four channels into 2 ohms (14.4V, 1% THD) and is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a whopping 200W x 2 into 4 ohms.

The JD400/4’s controls can be found on the input panel of the amplifier, with all speaker and power connections located along the opposite end of the extruded aluminum chassis. Signal processing features include high or low-pass 12 dB / octave filters (defeatable) for each channel pair, with continuously variable frequency selection from 50-500 Hz, and dual-range, differential-balanced inputs capable of accepting line-level or speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard equipment.

Onboard LED-clipping indicators are also included surrounding each input sensitivity control. This convenient feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. You will also find a set of buffered, pass-through preamp outputs on-board, so you can pass signals to another amplifier.

Specifications

Rated Continuous (RMS) Power @ 14.4 V
At 4 Ohms: 75 Watts RMS x 4
At 2 Ohms: 100 Watts RMS x 4
Bridged At 4 Ohms: 200 Watts RMS x 2

Rated Continuous (RMS) Power @ 12.5 V
At 4 Ohms: 60 Watts RMS x 4
At 2 Ohms: 90 Watts RMS x 4
Bridged At 4 Ohms: 180 Watts RMS x 2

General Specifications
Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power: >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W: >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ohms: >150 / 50 Hz
Damping Factor @ 2 Ohms: >75 / 50 Hz
THD+N @ Rated Power: <1% @ 2 Ohms per Ch.
Input Voltage Range at RCA Inputs: Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge: 4 AWG wire
Fuse Rating: 40 A (AFS, AGU or MaxiFuse™)

Signal Processing
Filter Mode(s): Low-Pass or High-Pass
Filter Slope(s): 12 dB/octave
Filter Frequency Range: 50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometers: No
Filter Defeat Function: Yes
Remote Level Control: No
Remote Level Modes: N/A
Channel Input Mode Switch: Yes (2/4 ch.)
Pass-Through Preamp Output: Buffered
Source Channel Selection for PreOuts: No (always 2 Ch)

Physical Specifications
Height (H): 2.10 in / 53 mm
Width (W): 9.50 in / 242 mm
Depth (D): 7.50 in / 180 mm

  • At 4 Ohms: 75 Watts RMS x 4 @ 14.4 V
  • At 2 Ohms: 100 Watts RMS x 4 @ 14.4 V
  • Bridged At 4 Ohms: 200 Watts RMS x 2 @ 14.4 V

Reviews

BOOK A FREE CONSULTATION

Want to know if this product is compatible with your car? We’ll tell you for free!