JL Audio 10W1v3-4 10" Subwoofer

JL Audio 10W1v3-4 10" Subwoofer

The 10W1v3 is an outstanding choice when space is very tight and amplifier power is moderate. It features shallow mounting depth (4.6 in. / 117 mm) and a compact motor structure, allowing it to comfortably fit in a lot of spaces where a typical 10-inch driver will not. Lacking a pole vent, the rear of the motor structure can be placed directly against an enclosure boundary. Excellent excursion capability and linearity allow it to reproduce sub-bass with shocking extension and quality. Several of JL Audio's proprietary technologies enhance its performance and reliability.

The 10W1v3-4 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 0.55 cu. ft. (15.57 l) sealed enclosure.

General Specifications
Continuous Power Handling (RMS): 300 W
Recommended RMS Amplifier Powe: 75 - 300 W
Nominal Impedance (Znom): 4 Ω

Physical Specifications
Nominal Diameter 10.0 in / 250 mm
Overall Diameter (A) 10.5 in / 267 mm
Mounting Hole Diameter (B) 9.0625 in / 230 mm
Bolt Hole Circle (C) 9.7 in / 246 mm
Magnet Diameter (D) 4.92 in / 125 mm
Mounting Depth (E) 4.6 in / 117 mm
Driver Displacement 0.037 cu ft / 1.05 L
Net Weight 9.9 lb / 4.5 kg

Parameters
Free Air Resonance (Fs) 26.15 Hz
Electrical “Q” (Qes) 0.475
Mechanical “Q” (Qms) 7.243
Total Speaker “Q” (Qts) 0.446
Equivalent Compliance (Vas) 1.533 cu ft / 43.41 L
One-Way Linear Excursion (Xmax)* 0.45 in / 11 mm
Reference Efficiency (no) 0.1600%
Efficiency (1 W / 1 m)** 84.2 dB SPL
Effective Piston Area (Sd) 53.584 sq in / 0.0346 sq m
DC Resistance (Re) 3.902 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

Car Toys' thoughts on the JL Audio 10W1v3-4
If you are wanting a lot of bass but do not have a lot of space, then the JL Audio 10W1v3-4 is your solution. Its shallow mounting depth and compact motor structure allow this 10” sub to fit into spaces that other 10” subwoofers cannot. The W1’s incredible excursion capability allow this driver produce amazing sub-bass with distortion free clarity. JL Audio reliability, compact design and stunning performance, you can’t go wrong.