Car Toys JL Audio Dual Subwoofer Bass Package - PPJLA9

Car Toys JL Audio Dual Subwoofer Bass Package - PPJLA9

Package Includes:
Two - JL Audio 10W0V3-4 W0v3 10" Subwoofer - 4 Ohm
One - JL Audio JD500/1 Monoblock Class D Subwoofer 500 Watt Amplifier
One - Atrend E10D 10" Dual Sealed Subwoofer Enclosure

JL Audio 10W0V3-4 W0v3 10" Subwoofer - 4 Ohm

The 10W0v3 is a rugged performer with excellent excursion capability and linearity and an overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.

The 10W0v3 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 0.65 cu. ft. (18.4 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. Detailed enclosure recommendations can be found below.

General Specifications

Continuous Power Handling: (RMS) 300 W
Recommended RMS Amplifier Power: 75 - 300 W
Nominal Impedance (Znom): 4 Ohm

Physical Specifications
Nominal Diameter: 10.0 in / 250 mm
Overall Diameter (A): 10.52 in / 267 mm
Mounting Hole Diameter (B): 9.0625 in / 230 mm
Bolt Hole Circle (C): 9.7 in / 246.5 mm
Magnet Diameter (D): 5.05 in / 128 mm
Mounting Depth (E): 4.90 in / 124 mm
Driver Displacement: 0.034 cu ft / 0.96 L
Net Weight: 7.50 lb / 3.40 kg

Parameters
Free Air Resonance (Fs): 32.09 Hz
Electrical “Q” (Qes): 0.64
Mechanical “Q” (Qms): 10.752
Total Speaker “Q” (Qts): 0.604
Equivalent Compliance (Vas): 1.095 cu ft / 31.01 L
One-Way Linear Excursion (Xmax)*: 0.45 in / 11.4 mm
Reference Efficiency (no): 0.1500%
Efficiency (1 W / 1 m)**: 84.07 dB SPL
Effective Piston Area (Sd): 48.909 sq in / 0.0316 sq m
DC Resistance (Re): 4.280 Ohm

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

JL Audio JD500/1 Monoblock Class D Subwoofer 500 Watt Amplifier

Designed to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the JD500/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion.

The JD500/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.

The JD500/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.

Specifications

Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ohm: 250 W RMS x 1
@ 3 Ohm: 350 W RMS x 1
@ 2 Ohm: 500 W RMS x 1

Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ohm: 225 W RMS x 1
@ 3 Ohm: 300 W RMS x 1
@ 2 Ohm: 400 W RMS x 1

General Specifications
Frequency Response: 7 Hz - 500 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power: >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W: >60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ohm: >1000 / 50 Hz
Damping Factor @ 2 Ohm: >500 / 50 Hz
THD+N @ Rated Power: <1% @ 2 Ohm per Ch.
Input Voltage Range @ RCA Inputs: Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge: 4 AWG wire
Fuse Rating: 50 A (AFS, AGU or MaxiFuse™)

Signal Processing
Filter Mode(s): Low-Pass only
Filter Slope(s): 12 dB/octave
Filter Frequency Range: 50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometer: No
Filter Defeat Function: No
Infrasonic Filter: No
Bass Boost EQ: Yes
Output Polarity Switch: No
Remote Subwoofer Level Control: Optional (RBC-1)
Remote Bass EQ Boost Control: No
Pass-Through Preamp Output: Buffered

Physical Specifications
Height (H): 2.10 in / 53 mm
Width (W): 9.50 in / 242 mm
Depth (D): 7.50 in / 190 mm

Atrend E10D 10" Dual Sealed Subwoofer Enclosure

The Bbox Enclosures perform exceptionally well with any subwoofer. These bad boys come with 1" Face Plates to allow for a woofer to sit comfortably and are built using the finest of raw materials. Go Bbox and experience sound at its best.

Specifications
Width: 26.25"
Height: 12"
Depth: 14"
Gross Cubic Feet Per Side: 1
Net Cubic Feet Per Side: 1